In few cases the small switching time is usually not enough to cause computers and servers to shut down. Online UPS supplies contineous power from internal batteries, which recharge contineously from the AC source. Thus these systems continue to supply in case of a utility failure, without time log.


To overcome there problems we DIGITECH manufacture Online UPS having fully Pulse Width Modulation (PWM) controlled and are available in Pure Sine Wave output with low harmonic distortions.






Features
MOSFET switching device
True Sine Wave
High Frequency Switching
Soft Start
Thyrister Controlled Rectifer
Fully Isolated Output
Very Low THD
Double Convertion Method
Hither Effiency
Very Low Audible Noise
UPS to Computer Communication Port

Technical Specifications

OFFLINE UPS

UPS is an alternative power supply source for electric and electronic power equipment when regular power supply source is suddenly cut off. Offline or standby UPS switches over from main to battery power during power cut off.

The battery-powered inverter of the UPS kicks into supplying power temporarily, so that systems/equipment can be shut down in an orderly manner, without damage.

We, DIGITECH have UPS of off-line topology. We use latest state of electronic topology i.e. microcontroller based circuit. Our selective models are available with communication port and remote on/off facility that enables us to operate large UPS (remote placed) from your computer room.

Technical Specifications

Model No.	UPS 300D/UPS1KD/UPS2KD/UPS3KD
Capacity	600 VA(for single computer)/1KVA/2KVA/3KVA
Input voltage	140-260VAC
Output voltage	220 VAC+- 1% to 7% in different modules
Input Frequency	50Hz. +- 5%
UPS output frequcncy	50Hz.
DC input	12-36 V DC
Battery charging	Float charging with periodic equalization
Output waveform	Quasi Sine Wave
AD detection	Continous waveform monitoring
Control technique	Digital IC controlled Pulse Width Modulation (PWM)
Efficiency	>8.5% at full load
Transfer Time	Less thank 6 Millisecond
Backup time	15-20 min. depending on battery Ah
Additional Features
Panel Indication
AC on
Working on battery
Overload
Charging status (except UPS600D)
Low battery
Soft on/off switch
Audio Indication Provided
Short beep while UPS is running on battery
Speeding beep starts after 80% discharge of battery
Protection Provided
Over current on DC source
Battery deep discharge
Spike and RF noise
Fuse on DC power circuit
Fuse on AC input
Low/High voltage
Battery over charge
Software for windows 9x,2k,XP,Win NT
Auto/Manual shut down of computer and UPS
UPS Log-in system (i.e. stores data with date and time while interruption of UPS)
Indicates wheter computer is working with battery or from AC

For a detailed discussion upon your specific needs, please feel free to talk to us.